mc4ren;6765279 dijo:
Tienes un botón en la zona del apoyabrazos? Como éste:
si es un E92 no lleva ese boton eso es en los E46 E39 etc.
si llevas navegador desde el idrive lo puedes ver. de todas maneras te pego las instrucciones en ingles, en español no lo encuentro.
The registration, also known as “pairing” can only be carried out if the encoding has been
successful.
The Bluetooth code required for the pairing process, an arbitrary number with 1 – 16 figures, can be
freely selected.􀀖
After the installation of the ULF upgrade and the insertion of the mobile phone holder (snap-in adapter),
the mobile phone must be registered as follows:
- Switch on the mobile phone
- Switch on the ignition
- Press the menu key on the radio
- The menu will appear on the radio display
- Select TEL by pressing the key beneath it on the radio
- The radio display shows Searching for connected devices
- Select BT by pressing the key beneath it on the radio
- The radio display shows BT devices
- Select SEARCH by pressing the key beneath it on the radio
- The radio display shows BT devices connectable
- Select and activate the Bluetooth option on the mobile phone. (The steps required for this differ from
phone to phone, see the manual supplied with the phone under searching for Bluetooth device,
connecting BT device, pairing BT device)
- After a successful search the display on the phone will show FOUND, the car will register itself on the
phone with a 5-digit number. Select the SELECT menu point
- The radio display shows Ext. device ready!
- Select ADD by pressing the key beneath it on the radio
- Enter a freely selectable 1 – 16-figure Bluetooth code on the radio using the number pad beneath it.
- Press the right-hand control knob on the radio to confirm the Bluetooth code
- Select CONNECTION or REGISTRATION on the mobile phone and confirm this
- CONNECTED will appear on the mobile phone
You have a maximum of 10 seconds to enter the passkey or Bluetooth code.􀀖
- Enter the same passkey and Bluetooth code in the mobile phone and confirm
- The message HANDS-FREE ACCEPTED will appear on the mobile.
- The radio display shows Pairing succeeded
- Select OK by pressing the key beneath it on the radio
- To exit the menu, select ”Arrow” by pressing the key beneath it on the radio
- Switch off the ignition for at least 30 seconds – the registration/pairing process is complete
If the registration process was not completed successfully, repeat the entire process quickly.􀀖
ues eso tengo la preeinstalacion del blutooth en un E92 , alguien sabe lo que me puede costar ponerme el blutooth?y si se puede poner en algun taller que no sea la bmw? soy de la provincia de valencia?
