- Registrado
- 8 Dic 2010
- Mensajes
- 9
- Reacciones
- 0
Buenas,
Pues eso que tengo instalado un Parrot Multican+Ck3000evo en mi e91 y resulta que no logro que el boton del "telefono" que hay en el volante funcione.
Según veo en la web de Parrot (aqui: http://dbinstall.parrot.com/Pdf_manual/Multican119.pdf):
"Depending on your vehicle's steering wheel controls, there are several possibilities for using a handsfree
the steering wheel contains this specific button."
Pues el caso es que pese a tener el boton "phone" y apretarlo un montón de veces para que como pone en las instrucciones pase automáticamente a "mode 2", sigo siempre en "mode 1".... !!!!! ](*,)
¿Alguien sabe qué concho pasa? ¿Cómo lo puedo solucionar?
Muchas gracias de antemano ;-)
Pues eso que tengo instalado un Parrot Multican+Ck3000evo en mi e91 y resulta que no logro que el boton del "telefono" que hay en el volante funcione.
Según veo en la web de Parrot (aqui: http://dbinstall.parrot.com/Pdf_manual/Multican119.pdf):
"Depending on your vehicle's steering wheel controls, there are several possibilities for using a handsfree
kit with the steering wheel controls:
-
-
Mode 1: the steering wheel does not feature any phone button, but only volume adjustment
controls ("Volume (+)" and "Volume (–)" buttons)
-Mode 2: the steering wheel features a single "Phone" button
-Mode 3: the steering wheel features an "Answer" button and a "Hang up" button
With BMW steering wheels configuration, you can use either Mode 1 or Mode 2.
controls ("Volume (+)" and "Volume (–)" buttons)
-Mode 2: the steering wheel features a single "Phone" button
-Mode 3: the steering wheel features an "Answer" button and a "Hang up" button
With BMW steering wheels configuration, you can use either Mode 1 or Mode 2.
Mode 1
is used by default, in this mode; no specific phone button buttons are used.
Mode 2
is immediately activated when a "Phone" button is pressed. The interface instantly detect that
the steering wheel contains this specific button."
Pues el caso es que pese a tener el boton "phone" y apretarlo un montón de veces para que como pone en las instrucciones pase automáticamente a "mode 2", sigo siempre en "mode 1".... !!!!! ](*,)
¿Alguien sabe qué concho pasa? ¿Cómo lo puedo solucionar?
Muchas gracias de antemano ;-)