CCC Fan
If you are lucky, you will find one of the remaining business-to-pro retrofit fan harnesses out there. I was able
to get one from a salvage yard who chopped-out the entire radio connector including the fan harness and
pins. If you have to make one, here’s how it hooks up. The little fan on the back of the CCC connects via small
harness from connector x14055 (3-pins) to connector x13813 (12-pin connector, left (closest to center) port
on back of CCC) and powers the fan.
• Connect Pin #1 (RT/SW – Volts(+)) from fan to Pin #1 of connector x13813 at CCC
• Connect Pin #2 (WS – Diag) from fan to Pin #11 of connector x13813 at CCC
• Connect Pin #3 (BR/SW – Volts(-)) from fan to Pin #5 of connector x13813 at CCC
